Allis Chalmers WD

Production: 1948 - 1953  

Production

Manufacturer:Allis Chalmers
Type:Row-Crop tractor
Factory:West Allis, Wisconsin, USA
Total built:146,125
Original price:$1,830
The Allis-Chalmers WD featured Two-Clutch Power Control and power-shifted rear wheels. The dual clutch system used a foot-operated dry clutch to disconnect the PTO and driveline from the engine. A hand-operated wet clutch allowed the PTO to operate while the tractor was slowed or stopped.

Allis Chalmers WD Power

Drawbar (claimed):19 hp 14.2 kW
PTO (claimed):26 hp 19.4 kW
Drawbar (tested):30.23 hp 22.5 kW
Belt (tested):34.63 hp 25.8 kW

Mechanical

Chassis:4x2 2WD
Steering:manual worm and horizontal sector
Brakes:manual external compression band type
Cab:Open operator station.
Transmission:4-speed non-synchronized gear

Capacity

Fuel:15 gal 56.8 L
Hydraulic system:1.25 gal 4.7 L

Hydraulics

Type:open center
Capacity:1.25 gal 4.7 L
Pressure:1200 psi 82.7 bar
Valves:1*Optional

Tractor hitch

Rear Type:Single Hitch Point

Power Take-off (PTO)

Rear PTO:transmission
live*Optional
Rear RPM:540

WD Serial Numbers

Location:The WD serial number is stamped into the rear of the transmission case on the left side.
1948:7
1949:9250
1950:35445
1951:72328
1952:105182
1953:131243

Electrical

Ground:positive
Charging system:Delco generator
Battery volts:6

Engine Detail

Allis Chalmers
tractor fuel
4-cylinder 8-valve
liquid-cooled vertical I-head
Displacement:201 ci 3.3 L
Bore/Stroke:4.00x4.00 inches 102 x 102 mm
Compression:4.5:1
Rated RPM:1400
Firing order:1-2-4-3
Starter:electric
hand crank
Starter volts:6
Coolant capacity:14 qts 13.2 L

Transmission

Type:non-synchronized gear
Gears:4 forward and 1 reverse

Dimensions

Wheelbase:88.1 inches 223 cm
Length:127 inches 322 cm
Height:81.5 inches 207 cm
Operating weight:3500 lbs 1587 kg
Ballasted weight:5050 lbs 2290 kg
Rear tread:55.6 to 90.1 inches 141 to 228 cm

Allis Chalmers WD Video

A B C D E F G H I J K L M N O P R S T U V W X Y Z
Contact  |  Privacy Policy