Case IH 9250

Production: 1990 - 1995  

Production

Manufacturer:Case IH
Type:Four-wheel Drive (4WD) tractor
Factory:Fargo, North Dakota, USA
Original price:$116,000 (1995)

Variants

four-wheel steer
articulated

Case IH 9250 Power

Engine:300 hp 223.7 kW
PTO (claimed):266 hp 198.4 kW
Drawbar (tested):237.29 hp 176.9 kW
PTO (tested):271.01 hp 202.1 kW

Mechanical

Chassis:4x4 articulated 4WD
Steering:hydrostatic power with articulation and front-axle steering
Brakes:integrated hydraulic caliper disc
Cab:Cab standard with air-conditioning. Optional deluxe cab adds side and rear windowwipers plus internal storage compartments.
Transmission:12-speed full power shift

Capacity

Fuel:200 gal 757.0 L
Hydraulic system:18 gal 68.1 L

Hydraulics

Type:closed center load sensing, pressure compensating
Capacity:18 gal 68.1 L
Pressure:2500 psi 172.4 bar
Valves:4
Total flow:27 gpm 102.2 lpm

Tractor hitch

Optional Rear Type:III
Control:optional
Rear lift:12,750 lbs 5783 kg

Power Take-off (PTO)

Optional Rear PTO:independent
Rear RPM:1000
Engine RPM:1000@2098

9250 Serial Numbers

Location:Under the left-side steps on front fender
1990:JCB0004600
1991:JCB0026501
1992:JCB0028400
1993:JCB0030500
1994:JEE0031773
1995:JEE0032808

Electrical

Ground:negative
Battery volts:12

Engine Detail

Cummins LTA-10
turbocharged aftercooled diesel
6-cylinder
liquid-cooled
Displacement:611 ci 10.0 L
Bore/Stroke:4.921x5.354 inches 125 x 136 mm
Power:300 hp 223.7 kW
Air cleaner:dual paper elements
Compression:16.0:1
Rated RPM:2100
Torque:1015 lb-ft 1376.3 Nm
Torque RPM:1400
Starter volts:12
Oil capacity:44 qts 41.6 L
Coolant capacity:54 qts 51.1 L

Transmission

Type:full power shift
Gears:12 forward and 3 reverse
Clutch:hydraulic wet disc
Full power shift transmission operated with two right-hand levers; one for shifting gears and the other for forward/reverse. Skip-Shift feature allows the transmission to quickly shift from first into higher gears (4th, 6th, 8th).

Dimensions

Wheelbase:131 inches 332 cm
Length:272.9 inches 693 cm
Minimum Width:93.5 inches 237 cm
Duals Width:144.3 inches 366 cm
Height (exhaust):143 inches 363 cm
Operating weight:30,060 lbs 13635 kg (20.8R42 duals)
Front tread:60 to 130 inches 152 to 330 cm
Rear tread:60 to 130 inches 152 to 330 cm

Case IH 9250 Video

A B C D E F G H I J K L M N O P R S T U V W X Y Z
Contact  |  Privacy Policy