Allis Chalmers D10

Production: 1959 - 1967  

Production

Manufacturer:Allis Chalmers
Type:Row-Crop tractor
Factory:West Allis, Wisconsin, USA
Total built:9,100
Original price:$3400 (1967)

Variants

cultivation tractor
two-row tractor

Allis Chalmers D10 Power

Engine:31 hp 23.1 kW
Drawbar (claimed):26 hp 19.4 kW
PTO (claimed):30.1 hp 22.4 kW
Drawbar (tested):28.78 hp 21.5 kW
PTO (tested):33.46 hp 25.0 kW

Mechanical

Chassis:4x2 2WD
Steering:manual
Brakes:differential mechanical shoe
Cab:Open operator station
Transmission:4-speed sliding gear

Hydraulics

Type:live
Valves:1 or 2

Tractor hitch

Rear Type:I
Type:Snap-Couple

Power Take-off (PTO)

Rear PTO:transmission (original), independent (later)
Rear RPM:540

D10 Serial Numbers

Location:Serial number stamped into the flange where the engine and transmission meet on the left side of the tractor.
1959:1001
1960:1950
1961:2801
1962:4511
1963:6801
1964:7675
1965:9204
1966:9486
1967:9795

Engine Detail

Allis-Chalmers Power-Crater
gasoline
4-cylinder
liquid-cooled vertical L-head
Original engine, used until 1961.
Displacement:138.7 ci 2.3 L
Bore/Stroke:3.375x3.875 inches 86 x 98 mm
Power:31 hp 23.1 kW
Air cleaner:oil bath
Compression:7.75:1
Rated RPM:1650
Starter volts:6
Oil capacity:4 qts 3.8 L
Coolant capacity:8 qts 7.6 L

Transmission

Type:sliding gear
Gears:4 forward and 1 reverse

Dimensions

Wheelbase:78.75 inches 200 cm
Length:120.5 inches 306 cm
Height (hood):52 inches 132 cm
Height (exhaust):76 inches 193 cm
Shiping weight:2,700 lbs 1224 kg
Ballasted weight:4,800 lbs 2177 kg
Clearance (front axle):21 inches 53 cm
Clearance (rear axle):22.25 inches 56 cm
Front tread:40 to 64.7 inches 101 to 164 cm
Rear tread:42 to 72 inches 106 to 182 cm

Allis Chalmers D10 Video

A B C D E F G H I J K L M N O P R S T U V W X Y Z
Contact  |  Privacy Policy