Cub Cadet AGS 2150
Type: Lawn Tractors
Contents:
Production | |
| Manufacturer: | Cub Cadet (a part of MTD) |
| Type: | Lawn tractor |
Variants | |
| gear | |
| hydrostatic |
Mechanical | |
| Chassis: | 4x2 2WD |
| Steering: | manual |
| Brakes: | internal expanding |
| Cab: | Open operator station. |
| Transmission: | 6-speed gear |
Power Take-off (PTO) | |
| Front PTO: | independent |
| Clutch: | electric |
2150 Serial Numbers | |
| Location: | Serial number plate on the left side of the 2150 frame, under the running boards. |
Electrical | |
| Ground: | negative |
| Charging system: | flywheel alternator |
| Charging amps: | 15 |
| Battery CCA: | 275 |
| Battery volts: | 12 |
Engine Detail | |
| Kohler Command | |
| gasoline | |
| 1-cylinder | |
| air-cooled | |
| Displacement: | 426 cc 26 ci |
| Power (gross): | 15 hp 11.2 kW |
| Idle RPM: | 1400-3600 |
| Starter: | electric |
| Starter volts: | 12 |
| Sparkplug: | 759-3693 |
| Sparkplug gap: | 0.040 inches 1.016 mm |
Transmission | |
| Transmission: | Auto Gear System |
| Type: | shaft-driven gear |
| Gears: | 6 forward and reverse |
| Oil capacity: | 7 qts 6.6 L |
| The Cub Cadet Auto Gear uses a six-speed transmission with forward and reverse foot pedals. The pedals control a clutch and should be fully depressed for whichever gear is selected. Using the pedals as a speed control will result in premature clutch failure. | |
Dimensions | |
| Wheelbase: | 47 inches 119 cm |
| Length: | 72 inches 182 cm |
| Width: | 51 inches 129 cm |
| Height (steering wheel): | 42 inches 106 cm |
| Weight: | 568 lbs 257 kg *Weight with 42-inch mower deck. |
| Ground clearance: | 6 inches 15 cm |
