John Deere 7330
Type: Row-crop Tractors
Contents:
Production | |
| Manufacturer: | John Deere |
| Type: | Row-Crop tractor |
| Factories: | Waterloo, Iowa, USA |
| Mannheim, Baden-Württemberg, Germany | |
| Original price: | $77,688 (2011) |
| In the spring of 2011, production of the 7330 was moved from Waterloo to Mannheim. The 110-inch rear axle option was dropped at that time. The 7330 was available with ROPS or a basic cab. Upgraded hydraulics and hitch were optional with ROPS but upgraded systems with a cab were only available on the 7330 Premium. | |
Variants | |
| base tractor | |
| deluxe tractor | |
| high-clearance |
John Deere 7330 Power | |
| Engine (gross): | 150 hp 111.9 kW |
| PTO (claimed): | 125 hp 93.2 kW |
Mechanical | |
| Chassis: | 4x2 2WD |
| 4x4 MFWD 4WD (optional) | |
| Steering: | hydrostatic power |
| Brakes: | differential hydraulic wet disc |
| Cab: | Two-post Roll-Gard ROPS. Cab optional. |
| Transmissions: | 16-speed partial power shift |
| 20-speed partial power shift | |
| 32-speed partial power shift | |
Capacity | |
| Fuel: | 66 gal 249.8 L |
| Hydraulic system: | 13.7 gal 51.9 L |
| Front axle: | 8.8 qts 8.3 L |
| Front hubs: | 1.6 qts 1.5 L |
Hydraulics | |
| Type: | constant flow load sensing |
| closed-center load sensing (optional ROPS) | |
| Capacity: | 13.7 gal 51.9 L |
| Pressure: | 2900 psi 200.0 bar |
| Valves: | 2 to 4 |
| Pump flow: | 21.1 gpm 79.9 lpm |
| 29 gpm 109.8 lpm (optional ROPS) | |
Tractor hitch | |
| Rear Type: | II |
| 3N/2 | |
| Control: | position control |
| electronic lower-link (optional ROPS) | |
| Rear lift (at 24"/610mm): | 8,800 lbs 3991 kg (II) |
| 8,200 lbs 3719 kg (3N/2) | |
Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540/1000 |
| Engine RPM: | 540@1995 1000@1995 |
7330 Serial Numbers | |
| Location: | Right side of main frame above front axle. |
Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging volts: | 14 |
| Battery volts: | 12 |
Engine Detail | |
| John Deere 6068HRW74 | |
| turbocharged intercooled diesel | |
| 6-cylinder 12-valve | |
| liquid-cooled | |
| Displacement: | 414.4 ci 6.8 L |
| Bore/Stroke: | 4.19x5.00 inches 106 x 127 mm |
| Rated Power (EC 97/98): | 150 hp 111.9 kW |
| Air cleaner: | dual paper elements |
| Compression: | 17.0:1 |
| Rated RPM: | 2100 |
| Idle RPM: | 850-2250 |
| Operating RPM: | 1500-2100 |
| Torque: | 507 lb-ft 687.5 Nm |
| Torque RPM: | 1500 |
| Firing order: | 1-5-3-6-2-4 |
| Oil capacity: | 20.8 qts 19.7 L |
| Coolant capacity: | 32.8 qts 31.0 L (ROPS) |
| 35.6 qts 33.7 L (cab) | |
| Intake valve clearance: | 0.014 inches 0.356 mm |
| Exhaust valve clearance: | 0.018 inches 0.457 mm |
Dimensions | |
| Wheelbase: | 104.3 inches 264 cm |
| Length: | 187.3 inches 475 cm |
| Width: | 65.5 inches 166 cm (flange axle) |
| Clearance (front axle): | 21.6 inches 54 cm (2WD) |
| 23 inches 58 cm (4WD) | |
| Clearance (rear axle): | 28.2 inches 71 cm |
| Clearance (drawbar): | 19 inches 48 cm |
| Rear axle: | 60 inch length 1524 mm |
| Rear axle: | 3.385 by 96 inches 85 by 2438 mm |
| Rear axle: | 3.385 by 110.5 inches 85 by 2806 mm |
| Front tread: | 77 to 101 inches 195 to 256 cm (2WD) |
| Rear tread: | 60 to 100.3 inches 152 to 254 cm (flange cast) |
| Rear tread: | 63.1 to 108.3 inches 160 to 275 cm (flange steel) |
| Rear tread: | 60 to 88 inches 152 to 223 cm (bar) |
