Production | |
| Manufacturer: | International Harvester |
| Type: | Row-Crop tractor |
| Factory: | Rock Island, Illinois, USA |
| Total built: | 1,162 |
| Original price: | $40,000 (1985 ) |
International Harvester 3288 Power | |
| Drawbar (claimed): | 80.7 hp 60.2 kW |
| PTO (claimed): | 90 hp 67.1 kW |
| Drawbar (tested): | 79.71 hp 59.4 kW |
| PTO (tested): | 90.46 hp 67.5 kW |
Mechanical | |
| Chassis: | 4x2 2WD |
| 4x4 MFWD 4WD | |
| Steering: | power |
| Brakes: | hydraulic wet disc |
| Cab: | Cab standard with heat and A/C. Optional burgundy or western finish interiors. |
| Transmission: | 16-speed partial power shift |
Capacity | |
| Fuel: | 50 gal 189.3 L |
| Hydraulic system: | 22.5 gal 85.2 L |
Hydraulics | |
| Type: | open center |
| Capacity: | 22.5 gal 85.2 L |
| Valves: | 2 or 3 |
| Pump flow: | 15 gpm 56.8 lpm |
| Total flow: | 27 gpm 102.2 lpm |
| Steering flow: | 12 gpm 45.4 lpm |
Tractor hitch | |
| Rear Type: | II |
| Control: | draft sensing |
Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540/1000 |
| Engine RPM: | 540@2100 1000@2100 |
3288 Serial Numbers | |
| Location: | Serial number plate on the right side of the tractor frame, ahead of the rear axle. |
| 1981: | 501 |
| 1982: | 1063 |
| 1983: | 1286 |
| 1984: | 1464 |
| 1985: | 1651 |
Electrical | |
| Ground: | negative |
| Battery volts: | 12 |
Engine Detail | |
| International Harvester D358 | |
| diesel | |
| 6-cylinder | |
| liquid-cooled | |
| Displacement: | 358 ci 5.9 L |
| Bore/Stroke: | 3.875x5.060 inches 98 x 129 mm |
| Air cleaner: | dual dry element |
| Compression: | 14.8:1 |
| Rated RPM: | 2400 |
| Idle RPM: | 900-2400 |
| Starter volts: | 12 |
| Oil capacity: | 11 qts 10.4 L |
| Coolant capacity: | 24 qts 22.7 L |
Transmission | |
| Type: | partial power shift |
| Gears: | 16 forward and 8 reverse |
| Clutch: | cerametallic disc |
| Oil capacity: | 90 qts 85.2 L |
| Left lever selects gear, right lever selects high, low, or reverse range. Tractor may be shifted on the move without the clutch between gear pairs (1-2, 3-4, etc). Synchronized shifting, using the clutch, between gear pairs (2 to 3, 4 to 5, etc). The transmission is four-gear with the powershift provided by an electric solenoid actuated Torque Amplifier. | |
Dimensions | |
| Wheelbase: | 105 inches 266 cm |
| Length: | 184 inches 467 cm |
| Width: | 102 inches 259 cm *Width at minimum tread. |
| Height (cab): | 112 inches 284 cm |
| Shiping weight: | 11100 lbs 5034 kg |
| Operating weight: | 11,760 lbs 5334 kg |
| Ground clearance: | 13 inches 33 cm |
| Rear axle: | 3.25 by 104 inches 82 by 2641 mm |
| Rear axle: | 3.25 by 118 inches 82 by 2997 mm |