International Harvester 3088

Production: 1981 - 1985  

Production

Manufacturer:International Harvester
Type:Row-Crop tractor
Factory:Rock Island, Illinois, USA
Total built:1,065
Original price:$28,900 (1985 )

International Harvester 3088 Power

Drawbar (claimed):70 hp 52.2 kW
PTO (claimed):80 hp 59.7 kW
Drawbar (tested):70.31 hp 52.4 kW
PTO (tested):81.35 hp 60.7 kW

Mechanical

Chassis:4x2 2WD
4x4 MFWD 4WD
Steering:power
Brakes:hydraulic wet disc
Cab:Four-post ROPS standard. Available with cab or as open-station tractor.
Transmission:16-speed partial power shift

Capacity

Fuel:50 gal 189.3 L
Hydraulic system:22.5 gal 85.2 L

Hydraulics

Type:open center
Capacity:22.5 gal 85.2 L
Valves:2 or 3
Pump flow:15 gpm 56.8 lpm
Total flow:27 gpm 102.2 lpm
Steering flow:12 gpm 45.4 lpm

Tractor hitch

Rear Type:II
Control:draft sensing

Power Take-off (PTO)

Rear PTO:independent
Rear RPM:540/1000
Engine RPM:540@2100 1000@2100

3088 Serial Numbers

Location:Serial number plate on the right side of the tractor frame, ahead of the rear axle.

Electrical

Ground:negative
Battery volts:12

Engine Detail

International Harvester D358
diesel
6-cylinder
liquid-cooled
Displacement:358 ci 5.9 L
Bore/Stroke:3.875x5.0625 inches 98 x 129 mm
Air cleaner:dual dry element
Compression:16.4:1
Rated RPM:2400
Idle RPM:900-2400
Starter volts:12
Oil capacity:11 qts 10.4 L
Coolant capacity:24 qts 22.7 L

Transmission

Type:partial power shift
Gears:16 forward and 8 reverse
Clutch:cerametallic disc
Oil capacity:90 qts 85.2 L
Left lever selects gear, right lever selects high, low, or reverse range. Tractor may be shifted on the move without the clutch between gear pairs (1-2, 3-4, etc). Synchronized shifting, using the clutch, between gear pairs (2 to 3, 4 to 5, etc). The transmission is four-gear with the powershift provided by an eletcric solenoid actuated Torque Amplifier.

Dimensions

Wheelbase:105 inches 266 cm
Length:184 inches 467 cm
Width:102 inches 259 cm *Width at minimum tread.
Height (cab):112 inches 284 cm
Shiping weight:10600 lbs 4808 kg
Operating weight:11940 lbs 5415 kg *With cab.
Ground clearance:13 inches 33 cm
Rear axle:3.25 by 104 inches 82 by 2641 mm
Rear axle:3.25 by 118 inches 82 by 2997 mm
Front tread:60 to 84 inches 152 to 213 cm
Rear tread:60 to 127.5 inches 152 to 323 cm

International Harvester 3088 Video

A B C D E F G H I J K L M N O P R S T U V W X Y Z
Contact  |  Privacy Policy