Deere 4230

Production: 1973 - 1977  

Production

Manufacturer:John Deere
Type:Row-Crop tractor
Factory:Waterloo, Iowa, USA
Total built:33 (gasoline)
90 (Low-Profile)
The John Deere 4230 was the Generation II replacement for the popular 4020. A row-crop tricycle front-end was an option on the 4230. Along with the smaller 4030, this was the final tractor from the Deere's Waterloo factory to have a tricycle option.

Variants

row-crop
high clearance
low-profile

John Deere 4230 Power

PTO (claimed):100 hp 74.6 kW
Drawbar (tested):83.95 hp 62.6 kW
PTO (tested):100.32 hp 74.8 kW

Mechanical

Chassis:4x2 2WD
4x4 HFWD 4WD
Final drives:planetary
Differential lock:hydro-mechanical rear
Steering:power
Brakes:differential hydraulic wet disc
Cab:Open operator station. Four-post Roll-Gard ROPS optional. Sound-Gard cab with air-conditioning optional.
Transmissions:8-speed partially synchronized
16-speed partial power shift
8-speed full power shift
13-speed creeper

Capacity

Fuel:37 gal 140.0 L
Hydraulic system:16 gal 60.6 L

Hydraulics

Type:closed center
Capacity:16 gal 60.6 L
Valves:1 to 3

Tractor hitch

Rear Type:II

Power Take-off (PTO)

Rear PTO:independent
Rear RPM:540/1000 (1.375)

4230 Serial Numbers

Location:Serial number plate on the rear of the John Deere 4230, above the PTO shaft.
1973:1000
1974:13000
1975:22074
1976:28957
1977:35588
Final:42331

Electrical

Ground:negative
Charging system:alternator
Batteries:2
Battery volts:6

Engine Detail

John Deere
diesel
6-cylinder
liquid-cooled inline horizontal-shaft
Displacement:404 ci 6.6 L
Bore/Stroke:4.25x4.75 inches 108 x 121 mm
Air cleaner:dry with secondary element
Pre-heating:ether injection
coolant heater*Optional
Compression:16.2:1
Rated RPM:2200
Idle RPM:800-2400
Operating RPM:1500-2200
Firing order:1-5-3-6-2-4
Starter:electric
Starter volts:12
Oil capacity:17 qts 16.1 L
Coolant capacity:24 qts 22.7 L

Dimensions

Wheelbase:104 inches 264 cm
2WD Length:165.6 inches 420 cm
4WD Length:169.3 inches 430 cm
Width:89.625 inches 227 cm
54.375 inches 138 cm (Cab)
Rear axle:Rack-and-pinion: 3.39 by 90 inches 86 by 2286 mm
Rear axle:Rack-and-pinion: 3.39 by 96 inches 86 by 2438 mm
Rear axle:Rack-and-pinion: 3.39 by 104 inches 86 by 2641 mm
Rear axle:Rack-and-pinion: 3.39 by 113 inches 86 by 2870 mm
Front tread:48 to 79 inches 121 to 200 cm
Front tread:52 to 86 inches 132 to 218 cm
Front tread:58 to 96 inches 147 to 243 cm
Rear tread:60 to 94 inches 152 to 238 cm
Rear tread:60 to 101 inches 152 to 256 cm
Rear tread:61 to 109 inches 154 to 276 cm
Rear tread:61 to 118 inches 154 to 299 cm

Deere 4230 Video

A B C D E F G H I J K L M N O P R S T U V W X Y Z
Contact  |  Privacy Policy