Challenger MT775E

Production: 2014 - 2017  

Production
Manufacturer:	Challenger (a part of AGCO)
Type:	Agricultural Crawler tractor
Factory:	Jackson, Minnesota, USA

Challenger MT775E Power
Engine (gross):	400 hp 298.3 kW
Drawbar (tested):	297.83 hp 222.1 kW
PTO (tested):	374.43 hp 279.2 kW

Mechanical
Chassis:	crawler
Steering:	electro-hydraulic differential
Brakes:	hydraulic wet disc
Cab:	Cab standard.
Transmission:	16-speed full power shift

Hydraulics
Pressure:	2900 psi 200.0 bar
Valves:	4 to 6
Pump flow:	58.1 gpm 219.9 lpm
85 gpm 321.7 lpm (optional)
SCV flow:	26.4 gpm 99.9 lpm
36 gpm 136.3 lpm (optional)

Tractor hitch
Rear Type:	IVN/III
Rear lift:	16000 lbs 7257 kg
Drawbar:	Cat. 4 standard
Cat. 3 optional

Power Take-off (PTO)
Rear PTO:	independent
Rear RPM:	1000 (1.75)

Electrical
Ground:	negative
Charging system:	alternator
Charging amps:	300 (2x 150amp)
Batteries:	2
Battery volts:	12

Engine Detail
AGCO Power
turbocharged diesel
7-cylinder 28-valve
liquid-cooled
Displacement:	598 ci 9.8 L
Bore/Stroke:	4.370x5.709 inches 111 x 145 mm
Emissions:	Tier IV
Emission control:	selective catalytic reduction (SCR)
Power (gross):	400 hp 298.3 kW
Maximum Power:	431 hp 321.4 kW
Rated RPM:	2100
Torque:	1417 lb-ft 1921.5 Nm
Torque RPM:	1500
Starter volts:	12

Transmission
Transmission:	Caterpillar
Type:	full power shift
Gears:	16 forward and 4 reverse
Clutch:	hydraulic wet disc

Dimensions
Gauge:	72 to 88 inches 182 to 223 cm
Gauge:	80 to 120 inches 203 to 304 cm (optional)
Gauge:	120 to 160 inches 304 to 406 cm (optional)