Challenger MT765D

Production: 2012 - 2013  

Production
Manufacturer:	Challenger (a part of AGCO)
Type:	Agricultural Crawler tractor
Factory:	Jackson, Minnesota, USA

Challenger MT765D Power
Engine (gross):	350 hp 261.0 kW
PTO (claimed):	285 hp 212.5 kW
Drawbar (tested):	267.55 hp 199.5 kW
PTO (tested):	338.67 hp 252.5 kW

Mechanical
Chassis:	crawler
Steering:	electro-hydraulic differential
Brakes:	hydraulic wet disc
Cab:	Cab standard.
Transmission:	16-speed full power shift

Hydraulics
Type:	closed-center pressure-flow compensated (PFC)
Pressure:	2900 psi 200.0 bar
Valves:	4 to 6
Pump flow:	43.5 gpm 164.6 lpm
59 gpm 223.3 lpm (optional)
SCV flow:	36 gpm 136.3 lpm

Tractor hitch
Rear Type:	III/IIIN
Rear lift:	16000 lbs 7257 kg

Power Take-off (PTO)
Rear PTO:	independent
Rear RPM:	1000 (1.75)

Electrical
Ground:	negative
Charging system:	alternator
Charging amps:	300 (2x 150amp)
Batteries:	2
Battery volts:	12

Engine Detail
AGCO Power
turbocharged air-to-air intercooled diesel
6-cylinder 24-valve
liquid-cooled
Displacement:	513.8 ci 8.4 L
Bore/Stroke:	4.370x5.709 inches 111 x 145 mm
Emissions:	Interim Tier IV
Emission control:	selective catalytic reduction (SCR)
Power (gross):	350 hp 261.0 kW
Maximum Power:	386 hp 287.8 kW
Starter volts:	12

Transmission
Transmission:	Caterpillar
Type:	full power shift
Gears:	16 forward and 4 reverse
Clutch:	hydraulic wet disc

Dimensions
Gauge:	72 to 88 inches 182 to 223 cm
Gauge:	80 to 120 inches 203 to 304 cm (optional)
Gauge:	120 to 160 inches 304 to 406 cm (optional)