Case IH 2294

Production: 1984 - 1988  

Production

Manufacturer:Case IH
Type:Row-Crop tractor
Factory:Racine, Wisconsin, USA

Case IH 2294 Power

Engine:154 hp 114.8 kW
Drawbar (claimed):116 hp 86.5 kW
PTO (claimed):130 hp 96.9 kW
Drawbar (tested):115.35 hp 86.0 kW
PTO (tested):131.97 hp 98.4 kW

Mechanical

Chassis:4x2 2WD
4x4 MFWD 4WD
Steering:power
Brakes:differential hydraulic wet disc
Cab:Four-post ROPS. Silent Guardian cab optional with air-conditioning.
Transmission:12-speed three-speed power shift

Capacity

Fuel:65 gal 246.0 L
25 gal 94.6 L (optional auxiliary tank)
Hydraulic system:25 gal 94.6 L

Hydraulics

Type:closed center
Capacity:25 gal 94.6 L
Pressure:2250 psi 155.1 bar
Valves:2 to 4 (3 only with 4WD)
Pump flow:23 gpm 87.1 lpm
Steering flow:8 gpm 30.3 lpm
Steering press.:2000 psi 137.9 bar

Tractor hitch

Rear Type:II
Rear lift (at 24"/610mm):6,600 lbs 2993 kg

Power Take-off (PTO)

Rear PTO:independent
Clutch:hydraulic
Rear RPM:540/1000

2294 Serial Numbers

Location:Inside cab or on right-front frame
1984:9931808
1985:9938113
1986:9941577
1987:9945448
1988:9949350

Electrical

Ground:negative
Charging system:alternator
Charging amps:72
105*Optional
Battery volts:12

Engine Detail

Case
turbocharged diesel
6-cylinder
liquid-cooled
Displacement:504 ci 8.3 L
Bore/Stroke:4.625x5.00 inches 117 x 127 mm
Power:154 hp 114.8 kW
Compression:15.8:1
Rated RPM:2100
Starter volts:12
Oil capacity:24 qts 22.7 L
Coolant capacity:38 qts 36.0 L

Transmission

Type:three-speed power shift
Gears:12 forward and 3 reverse
Oil capacity:100 qts 94.6 L
Three power-shift gears (1-3), plus reverse, in four ranges (1-4). Reverse does not function in fourth range.

Dimensions

Wheelbase:104 inches 264 cm
110 inches 279 cm *Optional long wheelbase.
Rear axle:3.5 by 96 inches 88 by 2438 mm
Rear axle:3.5 by 120 inches 88 by 3048 mm
Rear tread:60 to 88 inches 152 to 223 cm
Rear tread:60 to 112 inches 152 to 284 cm

Case IH 2294 Video

A B C D E F G H I J K L M N O P R S T U V W X Y Z
Contact  |  Privacy Policy