Allis Chalmers 6060

Production: 1980 - 1984  

Production

Manufacturer:Allis Chalmers
Type:Row-Crop tractor
Factory:West Allis, Wisconsin, USA
Total built:4,027
Original price:$21,460

Allis Chalmers 6060 Power

Drawbar (tested):50.87 hp 37.9 kW
PTO (tested):63.83 hp 47.6 kW

Mechanical

Chassis:4x2 2WD
4x4 MFWD 4WD (optional)
Steering:hydrostatic power
Brakes:differential hydraulic wet disc
Cab:Four-post ROPS canopy. Cab and air-conditioning optional.
Transmission:8-speed partially synchronized

Capacity

Fuel:32 gal 121.1 L
Rear diff.:37 qts 35.0 L

Hydraulics

Type:open center
Valves:2
Pump flow:11.4 gpm 43.1 lpm
Total flow:19 gpm 71.9 lpm

Tractor hitch

Rear Type:II
Rear lift (at 24"/610mm):3,500 lbs 1587 kg

Power Take-off (PTO)

Rear PTO:independent
Rear RPM:540

6060 Serial Numbers

Location:Right side of engine adapter flange
1980:1001
1981:1297
1982:2463
1983:3894
1984:4572
Final:5027

Electrical

Charging system:alternator
Charging amps:72
Batteries:1
2 (optional)
Battery volts:12

Engine Detail

Allis Chalmers 433T
turbocharged diesel
4-cylinder
liquid-cooled
Displacement:200 ci 3.3 L
Bore/Stroke:3.876x4.250 inches 98 x 108 mm
Air cleaner:paper element with pre-cleander
Compression:14.1:1
Rated RPM:2300
Starter volts:12
Oil capacity:10 qts 9.5 L
Coolant capacity:17 qts 16.1 L

Transmission

Type:partially synchronized
Gears:8 forward and 2 reverse
Oil capacity:12 qts 11.4 L
Two ranges with four gears in each range. Synchronized shifting between top two gears (3-4 and 7-8) in each range.

Dimensions

Wheelbase:93 inches 236 cm (2WD)
91.9 inches 233 cm (4WD)
Length:146.5 inches 372 cm
Width:68.5 inches 173 cm
Ground clearance:18.1 inches 45 cm (4WD front axle)
20.4 inches 51 cm (2WD front axle)
26.7 inches 67 cm (rear axle)

Allis Chalmers 6060 Video

A B C D E F G H I J K L M N O P R S T U V W X Y Z
Contact  |  Privacy Policy