John Deere D160
Type: Lawn Tractors
Contents:
Production | |
| Manufacturer: | John Deere |
| Type: | Lawn tractor |
| Factory: | Greeneville, Tennessee, USA |
| Original price: | $2,599 (2011 ) |
| Original price: | $2,349 (2015 ) |
Mechanical | |
| Chassis: | 4x2 2WD |
| Steering: | manual |
| Brakes: | mechanical shoe on transaxle |
| Cab: | Open operator station. Adjustable 15-inch tall seat with 5.5-inches of travel in ten positions and lumbar adjustment. Fender-mounted cup holder. Optional nylon sunshade canopy or snow enclosure. Optional 12-volt power outlet. |
| Transmission: | hydrostatic |
Capacity | |
| Fuel: | 4 gal 15.1 L |
| 2.4 gal 9.1 L *California model | |
Power Take-off (PTO) | |
| Front PTO: | independent |
| Clutch: | electric |
D160 Serial Numbers | |
| Location: | Serial number on rear of tractor, left side, under fender. |
Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 16 |
Engine Detail | |
| Briggs & Stratton ELS 44 | |
| gasoline | |
| 2-cylinder | |
| air-cooled vertical-shaft V-Twin | |
| Displacement: | 724 cc 44.2 ci |
| Power (gross): | 24 hp 17.9 kW |
| Air cleaner: | cartridge with foam pre-cleaner |
| Starter: | electric |
| Starter volts: | 12 |
| Oil capacity: | 2 qts 1.9 L |
| Sparkplug gap: | 0.030 inches 0.762 mm |
| Point gap: | 0.009 inches 0.229 mm |
| Intake valve clearance: | 0.005 inches 0.127 mm |
| Exhaust valve clearance: | 0.005 inches 0.127 mm |
Transmission | |
| Transmission: | Kanzaki Tuff Torq HD K46 |
| Type: | hydrostatic |
| Gears: | infinite forward and reverse |
| Oil change: | sealed unit, service not recommended |
| Hydrostatic transmission with right-side accelerator and decelerator/reverse foot pedals. Left-side brake pedal. Cruise control is standard equipment. | |
Dimensions | |
| Wheelbase: | 48.9 inches 124 cm |
| Length: | 69.25 inches 175 cm |
| Width: | 60 inches 152 cm (mower) |
| Height: | 45 inches 114 cm |
| Weight: | 525 lbs 238 kg *Weight with mower deck. |
