John Deere 80
Type: Standard-tread Tractors
Contents:
Production | |
| Manufacturer: | John Deere |
| Type: | Standard-tread tractor |
| Factory: | Waterloo, Iowa, USA |
| Total built: | 3,485 |
John Deere 80 Power | |
| Drawbar (claimed): | 46.32 hp 34.5 kW |
| Belt (claimed): | 57.49 hp 42.9 kW |
| Drawbar (tested): | 60.36 hp 45.0 kW |
| Belt (tested): | 65.33 hp 48.7 kW |
Mechanical | |
| Chassis: | 4x2 2WD |
| Steering: | manual |
| power assist optional | |
| Brakes: | mechanical expanding shoe |
| Cab: | Open operator station. Optional steel cab. |
| Transmission: | 6-speed unsynchronized gear |
Power Take-off (PTO) | |
| Rear RPM: | 540 |
80 Serial Numbers | |
| Location: | Serial number plate on the right side of the John Deere 80, ahead of the pulley and below the fuel filter. |
| 1955: | 8000001 |
| 1956: | 8000776 |
| Final: | 8003500 |
Electrical | |
| Ground: | positive |
| Battery volts: | 6 |
Engine Detail | |
| John Deere | |
| diesel | |
| 2-cylinder 4-valve | |
| liquid-cooled | |
| Displacement: | 470.7 ci 7.7 L |
| Bore/Stroke: | 6.125x8.00 inches 156 x 203 mm |
| Air cleaner: | oil bath |
| Compression: | 16:1 |
| Rated RPM: | 1125 |
| Firing order: | 1-2 |
| Starter type: | V4 gasoline pony motor |
| Coolant capacity: | 35 qts 33.1 L |
Transmission | |
| Transmission: | John Deere |
| Type: | unsynchronized gear |
| Gears: | 6 forward and 1 reverse |
| Clutch: | dry disc |
Dimensions | |
| Wheelbase: | 85.5 inches 217 cm |
| Length: | 142.75 inches 362 cm |
| Width: | 79.5 inches 201 cm |
| Height: | 81 inches 205 cm |
| Weight: | 8300 lbs 3764 kg |
| Ballasted weight: | 11485 lbs 5209 kg |
| Front tread: | 56.5 inches 143 cm |
| Rear tread: | 64.5/68.5 inches 163/173 cm |
