John Deere 5210

Production: 1998 - 2001  

Production

Manufacturer:John Deere
Type:Utility tractor
Factory:Augusta, Georgia, USA
Original price:$21,795 (2001 )

John Deere 5210 Power

Engine:53 hp 39.5 kW
PTO (claimed):45 hp 33.6 kW
PTO (tested):46.16 hp 34.4 kW

Mechanical

Chassis:4x2 2WD
4x4 MFWD 4WD
Steering:hydrostatic power
Brakes:hydraulic wet disc
Cab:Two-post ROPS. Cab optional.
Transmissions:9-speed unsynchronized gear
9-speed partially synchronized
12-speed power shuttle

Hydraulics

Type:open center
Pressure:2855 psi 196.9 bar
Valves:5
Pump flow:11.4 gpm 43.1 lpm
Total flow:18.2 gpm 68.9 lpm
Steering flow:6.8 gpm 25.7 lpm
Steering press.:1955 psi 134.8 bar

Tractor hitch

Rear Type:II/I
Rear lift (at 24"/610mm):3374 lbs 1530 kg

Power Take-off (PTO)

Rear PTO:independent
Rear RPM:540
540/540E*540E not available with collar shift transmission

5210 Serial Numbers

Location:The tractor's serial number plate is on the right side of the frame, above the front axle.
1998:120000
1999:220001
2000:320001
2001:420001

Engine Detail

John Deere 3029D
diesel
3-cylinder
liquid-cooled
Displacement:179 ci 2.9 L
Bore/Stroke:4.19x4.33 inches 106 x 110 mm
Power:53 hp 39.5 kW
Compression:17.8:1
Rated RPM:2400
Idle RPM:825-2600
Operating RPM:1600-2400
Torque:119.5 lb-ft 162.0 Nm
Torque RPM:1400
Starter volts:12
Coolant capacity:10 qts 9.5 L
Coolant change:2000 h

Dimensions

Wheelbase:80.7 inches 204 cm
2WD Length:122.6 inches 311 cm
4WD Length:125.9 inches 319 cm
Width:65.4 inches 166 cm
2WD Clearance (front axle):19.5 inches 49 cm
4WD Clearance (front axle):13.4 inches 34 cm
2WD Clearance (drawbar):15.8 inches 40 cm
4WD Clearance (drawbar):14.9 inches 37 cm
2WD Front tread:56.5 to 76.2 inches 143 to 193 cm
4WD Front tread:51.9 to 78 inches 131 to 198 cm
Rear tread:55.8 to 75.6 inches 141 to 192 cm

John Deere 5210 Video

A B C D E F G H I J K L M N O P R S T U V W X Y Z
Contact  |  Privacy Policy