John Deere 2130

Production: 1973 - 1977  

Production

Manufacturer:John Deere
Type:Utility tractor
Factory:Mannheim, Baden-Württemberg, Germany

John Deere 2130 Power

Engine (gross):79.1 hp 59.0 kW
Engine (net):73.8 hp 55.0 kW
PTO (claimed):60.4 hp 45.0 kW

Mechanical

Chassis:4x2 2WD
4x4 HFWD 4WD
Final drives:planetary
Differential lock:mechanical rear
Steering:manual recirculating ball bearing worm and nut
power optional
Brakes:hydraulic wet disc
Cab:Open operator station. Cab optional.
Transmissions:8-speed
16-speed

Hydraulics

Type:closed center
Pressure:2248 psi 155.0 bar
Pump flow:6.6 gpm 25.0 lpm
12.4 gpm 46.9 lpm *Optional

Tractor hitch

Rear Type:II
Rear lift:5560 lbs 2522 kg

Power Take-off (PTO)

Rear PTO:transmission
independent*Optional
Rear RPM:540
540/1000*Optional
Engine RPM:540@2100 1000@2100

2130 Serial Numbers

Location:Right side of tractor frame, above front axle.
1973:------
1974:140000
1975:155483
1976:190675
1977:230487
1978:274909
1979:309934

Electrical

Ground:negative
Charging system:alternator
Charging amps:28
Charging volts:14
Batteries:2
Battery volts:12
Battery AH:55

Engine Detail

John Deere
diesel
4-cylinder
liquid-cooled
Displacement:239 ci 3.9 L
Bore/Stroke:4.19x4.33 inches 106 x 110 mm
Power (gross):79.1 hp 59.0 kW
Fuel system:direct injection
Air cleaner:dry
Compression:16.8:1
Rated RPM:2500
Idle RPM:650-2660
Operating RPM:1400-2500
Torque:181.4 lb-ft 246.0 Nm
Torque RPM:1400
Firing order:1-3-4-2
Starter volts:12
Coolant capacity:12.1 qts 11.5 L

Dimensions

Wheelbase:85.8 inches 217 cm
Length:139.6 inches 354 cm
Width:80.3 inches 203 cm *Minimum width.
Height:102.4 inches 260 cm
Weight:5980 lbs 2712 kg
Rear axle:Flange
Rear axle:Rack-and-pinion
Front tread:53.5 to 73.6 inches 135 to 186 cm
Rear tread:61 to 76.8 inches 154 to 195 cm (flange)
Rear tread:61 to 96.1 inches 154 to 244 cm (rack-and-pinion)

John Deere 2130 Video

A B C D E F G H I J K L M N O P R S T U V W X Y Z
Contact  |  Privacy Policy