Production | |
Manufacturer: | International Harvester |
Type: | Utility tractor |
Original price: | $8,500 (1978) |
International Harvester 464 Power | |
Drawbar (claimed): | 39 hp 29.1 kW |
PTO (claimed): | 45 hp 33.6 kW |
Drawbar (tested): | 41.06 hp 30.6 kW |
PTO (tested): | 45.74 hp 34.1 kW |
Mechanical | |
Chassis: | 4x2 2WD |
Steering: | hydrostatic power |
Brakes: | independent hydraulic wet disc |
Cab: | ROPS optional |
Transmission: | 8-speed synchromesh |
Tractor hitch | |
Rear Type: | 1 |
Power Take-off (PTO) | |
Rear PTO: | independent |
Rear RPM: | 540 |
464 Serial Numbers | |
Location: | Serial number plate on the International 464 tractor clutch housing, on left side. |
1973: | 100003 |
1974: | 102196 |
1975: | 104775 |
1976: | 107128 |
1977: | 108636 |
1978: | 110479 |
Engine Detail | |
International Harvester C-175 | |
gasoline | |
4-cylinder | |
liquid-cooled | |
Displacement: | 175 ci 2.9 L |
Bore/Stroke: | 3.562x4.39 inches 90 x 112 mm |
Air cleaner: | dry |
Compression: | 7.19:1 |
Rated RPM: | 2400 |
Starter volts: | 12 |
Oil capacity: | 7 qts 6.6 L |
Coolant capacity: | 13 qts 12.3 L |
Transmission | |
Type: | synchromesh |
Gears: | 8 forward and 4 reverse |
Clutch: | dry disc |
Oil capacity: | 36 qts 34.1 L |
Four gears (1-4) in two ranges (low/high) plus reverse. |
Dimensions | |
Wheelbase: | 75.2 inches 191 cm |
Length: | 133 inches 337 cm (with 3-point) |
Width: | 66 inches 167 cm (min) |
Height (steering wheel): | 55 inches 139 cm |
Ground clearance: | 10 inches 25 cm |
Front tread: | 48 to 80 inches 121 to 203 cm |
Rear tread: | 52 to 76 inches 132 to 193 cm |