Challenger MT485E
Type: Utility Tractors
Contents:
Production | |
| Manufacturer: | Challenger (a part of AGCO) |
| Type: | Utility tractor |
Challenger MT485E Power | |
| Engine: | 140 hp 104.4 kW |
| PTO (claimed): | 130 hp 96.9 kW |
Mechanical | |
| Chassis: | 4x4 MFWD 4WD |
| Differential lock: | electro-hydraulic front and rear |
| Steering: | power |
| Brakes: | hydraulic wet disc |
| Cab: | Cab standard with air-conditioning. Auto-Guide 3000*Optional |
| Transmissions: | 16-speed four-speed power shift |
| 24-speed six-speed power shift | |
| continuously-variable transmission | |
Hydraulics | |
| Type: | open center |
| Valves: | up to 5 |
| Pump flow: | 26 gpm 98.4 lpm |
| 29 gpm 109.8 lpm *Optional | |
| 50 gpm 189.3 lpm *Optional | |
Tractor hitch | |
| Rear Type: | III/II |
| Rear lift (at 24"/610mm): | 11244 lbs 5100 kg |
| Rear Arms: | telescopic link end |
Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540/1000 |
| 540/540E/1000/1000E | |
Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 175 |
| 240*Total charging capacity with optional twin 120A system. | |
| Battery volts: | 12 |
Engine Detail | |
AGCO Power | |
| intercooled turbocharged diesel | |
| 4-cylinder | |
| liquid-cooled | |
| Displacement: | 299 ci 4.9 L |
| Bore/Stroke: | 4.251x5.276 inches 108 x 134 mm |
| Emissions: | Tier IV |
| Emission control: | selective catalytic reduction |
| Power: | 140 hp 104.4 kW |
| Maximum Power: | 150 hp 111.9 kW |
| Fuel system: | high-pressure common rail direct injection |
| Rated RPM: | 2100 |
| Torque: | 623 lb-ft 844.8 Nm |
| Torque RPM: | 1600 |
| Starter: | electric |
| Starter volts: | 12 |
Dimensions | |
| Wheelbase: | 105 inches 266 cm |
| Width: | 72 inches 182 cm *Minimum width |
| Shiping weight: | 15432 lbs 6999 kg |
| Rear axle: | Flange |
| Rear axle: | Bar |
