Challenger MT297B
Type: Compact Utility Tractors
Contents:
Production | |
| Distributor: | Challenger (a part of AGCO) |
| Manufacturer: | Iseki |
| Type: | Compact Utility tractor |
| Factory: | Matsuyama, Japan |
Challenger MT297B Power | |
| Engine: | 59.1 hp 44.1 kW |
| PTO (claimed): | 46.4 hp 34.6 kW |
Mechanical | |
| Chassis: | 4x4 MFWD 4WD |
| Steering: | power |
| Brakes: | wet disc |
| Cab: | Two-post folding ROPS. |
| Transmission: | 12-speed |
Hydraulics | |
| Type: | open center |
| Pressure: | 2276 psi 156.9 bar |
| Pump flow: | 11.5 gpm 43.5 lpm |
| Total flow: | 17.5 gpm 66.2 lpm |
| Steering flow: | 6.0 gpm 22.7 lpm |
Tractor hitch | |
| Rear Type: | II/I |
| Rear lift (at ends): | 3748 lbs 1700 kg |
| Rear lift (at 24"/610mm): | 3307 lbs 1500 kg |
Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540 (1.375) |
Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Battery volts: | 12 |
Engine Detail | |
| Iseki | |
| diesel | |
| 4-cylinder | |
| liquid-cooled | |
| Displacement: | 180 ci 3.0 L |
| Power: | 59.1 hp 44.1 kW |
| Rated RPM: | 2600 |
| Starter volts: | 12 |
Transmission | |
| Transmission: | PowerShuttle |
| Gears: | 12 forward and reverse |
| Three ranges with four gears each. Transmission can be shifted from forward to reverse on the go, without the clutch. In-range gear changes can be made on the go with the clutch. | |
Dimensions | |
| Wheelbase: | 79 inches 200 cm |
| Length: | 134.6 inches 341 cm |
| Width: | 69.7 inches 177 cm |
| Height: | 91.7 inches 232 cm |
| Weight: | 4,078 lbs 1849 kg |
| Ground clearance: | 15.7 inches 39 cm |
