Case IH STX275

Production: 2000 - 2005  

Production
Manufacturer:	Case IH
Type:	Four-wheel Drive (4WD) tractor
Factory:	Fargo, North Dakota, USA
The Case IH STX275 is the same as the New Holland TJ275.

Case IH STX275 Power
Engine:	275 hp 205.1 kW
Drawbar (claimed):	205 hp 152.9 kW
PTO (claimed):	225 hp 167.8 kW
Drawbar (tested):	211.57 hp 157.8 kW
PTO (tested):	274.11 hp 204.4 kW

Mechanical
Chassis:	4x4 articulated 4WD
Final drives:	inboard planetary
Steering:	hydrostatic power
Brakes:	integrated hydraulic wet disc
Cab:	Surveyor Cab standard.
Transmissions:	16-speed full power shift
24-speed fully synchronized

Hydraulics
Type:	pressure flow compensated (PFC)
Rear valves:	4 to 7
Pump flow:	40 gpm 151.4 lpm
55 gpm 208.2 lpm *Optional

Tractor hitch
Rear Type:	IVN/III
Rear lift (at 24"/610mm):	14500 lbs 6577 kg

Power Take-off (PTO)
Rear PTO:	independent*Optional
Rear RPM:	1000 (1.75)

Electrical
Ground:	negative
Charging system:	alternator
Battery volts:	12

Engine Detail
CDC
turbocharged aftercooled diesel
6-cylinder
liquid-cooled
Displacement:	504.5 ci 8.3 L
Bore/Stroke:	4.488x5.315 inches 114 x 135 mm
Power:	275 hp 205.1 kW
Air cleaner:	dual paper elements
Compression:	17.1:1
Rated RPM:	2000
Torque:	1022 lb-ft 1385.8 Nm
Torque RPM:	1400
Starter volts:	12
Oil capacity:	25.2 qts 23.8 L

Dimensions
Wheelbase:	139 inches 353 cm
145 inches 368 cm (ACCUSTEER)
Length:	295.5 inches 750 cm
Width:	36.5 inches 92 cm (frame)
Height:	145.2 inches 368 cm
Front axle:	4.0 inch diameter 101 mm
Rear axle:	4.0 inch diameter 101 mm
Rear tread:	60 to 176 inches 152 to 447 cm