Case IH JX1095C

Production: 2005 - 2008  

Production
Manufacturer:	Case IH
Type:	Utility tractor
Factory:	Jesi, Italy

Case IH JX1095C Power
Engine (gross):	90 hp 67.1 kW
PTO (claimed):	77 hp 57.4 kW
Drawbar (tested):	74.3 hp 55.4 kW
PTO (tested):	83.8 hp 62.5 kW

Mechanical
Chassis:	4x4 MFWD 4WD
Steering:	power
Brakes:	hydraulic wet disc
Cab:	Two-post folding ROPS. Cab optional.
Transmissions:	12-speed mechanical shuttle
12-speed power shuttle

Hydraulics
Type:	open center
Pressure:	2755 psi 190.0 bar
Valves:	1 to 4
Pump flow:	16.9 gpm 64.0 lpm
Steering flow:	9.4 gpm 35.6 lpm

Tractor hitch
Rear Type:	II
Control:	mechanical lower-link draft sensing.
Rear lift:	3960 lbs 1796 kg

Power Take-off (PTO)
Rear PTO:	independent
Clutch:	mechanical dry disc
Rear RPM:	540 (1.375)

Electrical
Ground:	negative
Charging system:	alternator
Charging amps:	120
Battery CCA:	730
Battery volts:	12

Engine Detail
CNH
turbocharged diesel
4-cylinder
liquid-cooled
Displacement:	273.7 ci 4.5 L
Bore/Stroke:	4.094x5.197 inches 104 x 132 mm
Power (gross):	90 hp 67.1 kW
Fuel system:	direct injection
Air cleaner:	dual paper elements
Pre-heating:	thermostart
Compression:	17.5:1
Rated RPM:	2300
Starter volts:	12

Dimensions
Wheelbase:	86 inches 218 cm
Length:	157 inches 398 cm
Width:	69.6 inches 176 cm *Minimum width.
Operating weight:	6,980 lbs 3166 kg
Ballasted weight:	8,045 lbs 3649 kg