Case IH Farmall 75A
Type: Utility Tractors
Contents:
Production | |
| Manufacturer: | Case IH |
| Type: | Utility tractor |
Case IH Farmall 75A Power | |
| Engine: | 74 hp 55.2 kW |
| PTO (claimed): | 60 hp 44.7 kW |
Mechanical | |
| Chassis: | 4x2 2WD |
| 4x4 MFWD 4WD | |
| Final drives: | inboard planetary |
| Differential lock: | mechanical rear |
| Steering: | power |
| Brakes: | wet disc |
| Cab: | Two-post folding ROPS. Cab optional with air-conditoning. |
| Transmissions: | 8-speed mechanical shuttle |
| 12-speed power shuttle | |
| 20-speed creeper | |
Hydraulics | |
| Type: | open center |
| Rear valves: | 2 or 3 |
| Pump flow: | 12.6 gpm 47.7 lpm |
Tractor hitch | |
| Rear Type: | II/I |
| Control: | position and draft control |
| Rear lift (at ends): | 5952 lbs 2699 kg |
| 6614 lbs 3000 kg *Optional | |
| Rear lift (at 24"/610mm): | 4299 lbs 1950 kg |
| 4740 lbs 2150 kg *Optional | |
Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540 (1.375) |
| Engine RPM: | 540@1957 540E@1592 |
Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 120 |
| Battery volts: | 12 |
Engine Detail | |
| FPT | |
| turbocharged aftercooled diesel | |
| 3-cylinder | |
| liquid-cooled | |
| Displacement: | 178.8 ci 2.9 L |
| Bore/Stroke: | 4.09x4.53 inches 104 x 115 mm |
| Emissions: | Tier IV |
| Power: | 74 hp 55.2 kW |
| Fuel system: | electronic high-pressure common rail direct injection |
| Rated RPM: | 2300 |
| Starter: | electric |
| Starter volts: | 12 |
Dimensions | |
| 2WD Wheelbase: | 81.2 inches 206 cm |
| 4WD Wheelbase: | 81.8 inches 207 cm |
| Length: | 151.8 inches 385 cm |
| Height (cab): | 100.2 inches 254 cm |
| Rear axle: | Flange |
