AGCO Allis 9690

Production: 1994 - 1995  

Production
Manufacturer:	AGCO Allis (a part of AGCO)
Type:	Row-Crop tractor
Original price:	$107,000 (1995 )

AGCO Allis 9690 Power
PTO (claimed):	195 hp 145.4 kW
Drawbar (tested):	170.56 hp 127.2 kW
PTO (tested):	205.49 hp 153.2 kW

Mechanical
Chassis:	4x4 MFWD 4WD
Final drives:	inboard planetary
Differential lock:	electro-hydraulic
Steering:	power
Brakes:	hydraulic wet disc
Cab:	Cab standard.
Transmission:	18-speed full power shift

Hydraulics
Type:	closed center pressure-compensating
Pressure:	2500 psi 172.4 bar
Valves:	3
Pump flow:	24 gpm 90.8 lpm *Advertised. Actual flow during testing was 21.8 GPM.

Tractor hitch
Rear Type:	III/II
Control:	lower-link draft sensing
Rear lift:	9900 lbs 4490 kg *Advertised. Actual tested lift capacity was 8172 pounds.

Power Take-off (PTO)
Rear PTO:	independent
Clutch:	hydraulic wet disc
Rear RPM:	1000

9690 Serial Numbers
Location:	Console, right side
1994:	981001
1995:	981501

Electrical
Ground:	negative
Charging system:	alternator
Charging amps:	105
Batteries:	2
Battery CCA:	580
Battery volts:	12

Engine Detail
Deutz BF6L513R
turbocharged diesel
6-cylinder
air-cooled
Displacement:	584 ci 9.6 L
Bore/Stroke:	4.92x5.12 inches 125 x 130 mm
Compression:	15.8:1
Rated RPM:	2300
Starter volts:	12
Oil capacity:	24 qts 22.7 L

Transmission
Type:	full power shift
Gears:	18 forward and 9 reverse
Clutch:	hydraulic wet disc

Dimensions
Wheelbase:	115 inches 292 cm
Length:	200 inches 508 cm
Width:	96 inches 243 cm
Height (cab):	120.5 inches 306 cm
Shiping weight:	18100 lbs 8210 kg
Operating weight:	19405 lbs 8802 kg
Clearance (front axle):	22 inches 55 cm
Clearance (drawbar):	17 inches 43 cm
Rear axle:	3.875 by 96 inches 98 by 2438 mm
Rear axle:	3.875 by 115 inches 98 by 2921 mm