Upton 180
Type: Standard-tread Tractors
Contents:
Production | |
| Manufacturer: | Upton |
| Type: | Standard-tread tractor |
| Factory: | Corowa, New South Wales, Australia |
Upton 180 Power | |
| Engine: | 180 hp 134.2 kW |
Mechanical | |
| Chassis: | 4x2 2WD |
| Transmission: | 21-speed |
Hydraulics | |
| Pressure: | 2500 psi 172.4 bar |
| Total flow: | 20 gpm 75.7 lpm |
Engine Detail | |
| Nissan UD43 | |
| diesel | |
| 4-cylinder | |
| liquid-cooled | |
| Two-stroke diesel engine. | |
| Displacement: | 302 ci 4.9 L |
| Bore/Stroke: | 4.33x5.118 inches 110 x 130 mm |
| Power: | 180 hp 134.2 kW |
| Compression: | 16:1 |
| Rated RPM: | 2400 |
| Torque: | 458 lb-ft 621.0 Nm |
| Torque RPM: | 1400 |
Transmission | |
| Gears: | 21 forward and 9 reverse |
| The Upton 180 used military-surplus gear boxes. The first gearbox offered four-forward and one-reverse speed. The second gearbox offered five-forward and one-reverse gear. This arrangement offered 21 forward and nine reverse gear combinations. The original rear gearbox was a Spicer from the LVT-4 landing craft. Later, Mack gearboxes from the M3 tank were used. | |
Dimensions | |
| Length: | 180 inches 457 cm |
| Width: | 153.75 inches 390 cm |
| Height: | 88 inches 223 cm |
| Weight: | 18,500 lbs 8391 kg |
| Ground clearance: | 16 inches 40 cm |
