Cub Cadet 147
Type: Garden Tractors
Contents:
Production | |
| Manufacturer | Cub Cadet (a part of International Harvester) |
| Type | Garden tractor |
| Factory | Louisville, Kentucky, USA |
Mechanical | |
| Chassis | 4x2 2WD |
| Steering | manual |
| Brakes | mechanical disc |
| Cab | Open operator station with padded seat. |
Tractor hitch | |
| Type | Cub Cadet three-point OptOptional |
Power Take-off (PTO) | |
| Clutch | mechanical dry disc |
| Front RPM | 3600 |
147 Serial Numbers | |
| 1969 | 316816 |
| 1970 | 322858 |
| 1971 | 373301 |
| Final | 400000 |
147 Serial Location | |
| Serial plate on rear of tractor. |
Electrical | |
| Ground | negative |
| Charging system | generator |
| Charging amps | 15 |
| Battery volts | 12 |
Engine Detail | |
| Kohler K321A | |
| gasoline | |
| 1-cylinder | |
| air-cooled | |
| Displacement | 512 cc 31.27 ci |
| Bore/Stroke | 3.50x3.25 inches 89 x 83 mm |
| Power | 14 hp 10.4 kW |
| Air cleaner | dry |
| Compression | 6:1 |
| Rated RPM | 3600 |
| Idle RPM | 1000-3800 |
| Torque | 23.5 lb-ft 31.9 Nm |
| Torque RPM | 2200 |
| Starter volts | 12 |
| Sparkplug | Champion H-10 |
| Sparkplug gap | 0.025 inches 0.635 mm |
| Point gap | 0.020 inches 0.508 mm |
| Intake valve clearance | 0.010 inches (cold) 0.254 mm |
| Exhaust valve clearance | 0.020 inches (cold) 0.508 mm |
Transmission | |
| Type | hydrostatic |
| Gears | infinite forward and reverse |
| Oil capacity | 7 qts 6.6 L |
| Oil type | IH Hy-Tran |
Dimensions | |
| Wheelbase | 43 inches 109 cm |
| Length | 64 inches 162 cm |
| Width | 33 inches 83 cm |
| Height (steering wheel) | 39.75 inches 100 cm |
| Shiping weight | 740 lbs 335 kg |
| Ground clearance | 6 inches 15 cm |
| Front axle | Cast-iron |
| Rear axle | Flange |
| Front tread | 27 inches 68 cm |
| Rear tread | 27 inches 68 cm |
